Pack of 25
Sentia is a hand held, portable testing device which measures the concentration of free sulfur […]
Apparatus for determination of free and total SO2: • Potentiometric determination for simple and rapid […]
Apparatus for the determination of free and total SO2: • Automatic titration by potentiometry • […]
For Free & Total SO2 titrations using Orion Star T940 All-in-One Titrator. ISE, 1m Cable, […]
Use the Orion Star T940 all-in-one titrator for flexible pH, redox and ion concentration titrations […]
From R&D Glass
From R&D Glass
Complete all-glass apparatus assembly for free and total SO2 anaylsis from General Glassblowing.
Fritted Bubbler Tube for the General Glassblowing SO2 all-glass assembly.
One piece condenser and impinger body for the General Glassblowing SO2 all-glass assembly.
100 mL 3-neck, round bottom flask with springs and 19/38 fittings for the General Glassblowing […]
Impinger bottom with hooks for the General Glassblowing SO2 all-glass assembly.
Set of two 1.75 SS springs for the General Glassblowing SO2 all-glass assembly.
19/38 glass stopper for the General Glassblowing SO2 all-glass assembly.
1/4 ID PVC (tygon) tubing for connections.
Regular clamp holder for use on a support stand or wherever a 90 degree angle […]
3-fingered clamp for use on a support stand that holds irregular shapes easily. Two are […]
1/4 ID amber latex rubber tubing for all kinds of connections.
Connector that provides fast, smooth connections of tubing.
Nalgene airejector aspiration pump for air removal.
Calibrated range flowmeter. Water flow 0.4 to 40 mL/minute, air flow 20 to 2000 mL/minute.
Clamps for all types of plastic and rubber tubing. Two are included in the SO2 […]
Standard clip joint clamp in green.
Support stand with a steel rod and black, stamped steel base.
100 mL side port flask for the SO2 A/O setup.
Support ring for flask, made of compressed cork, for the SO2 A/O setup.
Bubbler/stopper for the side port flask in the SO2 A/O setup.
Stopper/glass tubing adapter for the SO2 A/O setup.
Impinger set for the A/O apparatus includes the impinger top and bottom.
The Accuflow 5000 works as a vacuum pump, timer and flowmeter for the SO2 A/O […]
Plastic impinger base for the SO2 A/O apparatus.
Impinger top for the SO2 A/O apparatus.
Impinger bottom for the SO2 A/O apparatus.
300 mm jacket length graham condenser. Joint size: 24/40. Condenser has top standard taper outer […]
The heating mantle controller is optional for the A/O setup. A solid state, proportional voltage […]
Heating mantle extension with 6 inch support ring that attaches to ring stand or distillation […]
The M Series heating mantle has a durable aluminum housing outside and resilient glass fabric […]
The Electrothermal heating mantle with controller features a vented case that creates an airflow, allowing […]
Aeration-oxidation apparatus complete setup No. 2 with Nalgene aspirator, flowmeter, clamps and support stand for […]
Aeration-oxidation apparatus complete setup No. 3 with Accuflow 5000 (pump/timer/flowmeter), clamps and support stand for […]